GetSimple Support Forum
PROBLEM Invalid "Upgrade Check Failed" alert - Printable Version

+- GetSimple Support Forum (http://get-simple.info/forums)
+-- Forum: GetSimple (http://get-simple.info/forums/forumdisplay.php?fid=3)
+--- Forum: General Questions and Problems (http://get-simple.info/forums/forumdisplay.php?fid=16)
+--- Thread: PROBLEM Invalid "Upgrade Check Failed" alert (/showthread.php?tid=8797)

Invalid "Upgrade Check Failed" alert - johnywhy - 2016-10-27

hi

brand new GS install:
my admin panel says 


Quote:GetSimple Version 3.3.13

Upgrade Check Failed !


this does not make sense, as 3.3.13 IS the latest version. 

how to fix?

thx

RE: Invalid "Upgrade Check Failed" alert - shawn_a - 2016-10-27

It says the check failed, makes perfect sense.

Sometimes it fails to check for updates, it will probably work when the cache expires or you clear it.

RE: Invalid "Upgrade Check Failed" alert - johnywhy - 2016-10-27

hrm, i cleared cache and placed the your debug codes in the config file, as described here
http://get-simple.info/forums/showthread.php?tid=5587&pid=42656#pid42656

still getting the error.
cannot find debuglog.

is there a fix for this?
thx!

RE: Invalid "Upgrade Check Failed" alert - Timbow - 2016-10-27

If it annoys you I think you can turn off the version check in gsconfig.php

RE: Invalid "Upgrade Check Failed" alert - johnywhy - 2016-10-27

(2016-10-27, 08:45:37)Timbow Wrote: If it annoys you I think you can turn off the version check in gsconfig.php

ok, thx. 


solved

RE: Invalid "Upgrade Check Failed" alert - shawn_a - 2016-10-27

It could be blocked on your host.. it uses curl and fals back to fopel, there is a thead with detailed debugging of the api calls.
Or just ignore it...

RE: Invalid "Upgrade Check Failed" alert - johnywhy - 2016-10-27

(2016-10-27, 11:26:15)shawn_a Wrote: It could be blocked on your host.. it uses curl and fals back to fopel, there is a thead with detailed debugging of the api calls.
Or just ignore it...

strangely, it does not always show the alert. 


also, the Updater plugin indicates an upgrade. 
also shows Send Anonymous Data failed. 

[Image: b1e0256512d488a7cc2300f61ebb3403.png]

RE: Invalid "Upgrade Check Failed" alert - shawn_a - 2016-10-28

I bet that plugin does not calculate >.10 properly.

RE: Invalid "Upgrade Check Failed" alert - Faramir - 2016-10-31

I had this message too, after updating from 3.3.8.
Flushing all caches removed it.

RE: Invalid "Upgrade Check Failed" alert - shawn_a - 2016-10-31

It always fails after upgrades and i have no idea why.