Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My Template
#51
I finally saw that it is necessary to intervene on the template + admin file and create new parameters. I also modified the module to be able to remove behavior 5 on all pages.

on the other hand, the slideshow is too large and does not display well see screenshot). Otherwise congratulations for this great integration for GS.
Thank you.
Reply
#52
(2020-06-30, 15:09:23)denis Wrote: The template uses Bootstrap 2 framework & Bootstrap 3 carousel for big slider (original slider from this theme - https://www.graphberry.com/products/prev...html-theme).

Strange, here all good:
http://www.responsinator.com/?url=http%3...et.tech%2F

And here:
http://mattkersley.com/responsive/

I do not know how much you can believe what the sites listed above or similar show.

What devices have you tried on? Need print screens. Which slider do you use? Big or small. In the big slider, arrows are hidden when viewed on a mobile device. Go to next slide - by swipe. Which browsers were tested in?

On android 8, everything is displayed normally.

Perhaps you are using an old browser.

Hi Denis
I've made some modifications to it may be those modifications...
I'm on a Galaxy S10 and here is a screenshot
http://www.stormscellar.com/files/example.jpg

http://www.responsinator.com/?url=http:/...tsalon.com
http://mattkersley.com/responsive/

sorry for the delay in response.. I was pulled off on a work project

John
Reply
#53
(2020-07-04, 05:32:06)sidotij Wrote: Hi Denis
I've made some modifications to it may be those modifications...
I'm on a Galaxy S10 and here is a screenshot
http://www.stormscellar.com/files/example.jpg

http://www.responsinator.com/?url=http:/...tsalon.com
http://mattkersley.com/responsive/

sorry for the delay in response.. I was pulled off on a work project

John

All image sizes must be the same as in the original theme. Including the slider. Big slider: 1800x800 px, small slider: 920x720 px

At a certain resolution, images are not displayed on the small slider. Only text is displayed (heading).

It is also possible that this is due to the fact that you made changes to the template code.
Reply
#54
(2020-07-04, 06:40:31)denis Wrote: All image sizes must be the same as in the original theme. Including the slider. Big slider: 1800x800 px, small slider: 920x720 px

At a certain resolution, images are not displayed on the small slider. Only text is displayed (heading).

It is also possible that this is due to the fact that you made changes to the template code.

I went back to an unedited copy of the template and I see that is the behavior
All good and thank you for looking at it.

John
Reply
#55
maybe make a "boxet" version, i have 4k monitor and it looks a bit weird, but then again, most websites looks weird in 4k, like those headers and footers Wink
Reply
#56
I wonder how I can hide the labels : "component x" and "page content" on the page ? I cannot see the option in the settings.
Those labels are helpful when making the website, but are confusing for the visitors when the site is done.

Can anyone help me ?
Reply
#57
(2020-07-25, 23:27:09)Bill Wrote: I wonder how I can hide the labels : "component x" and "page content" on the page ? I cannot see the option in the settings.
Those labels are helpful when making the website, but are confusing for the visitors when the site is done.

Can anyone help me ?

Visitors should not see them. They are visible only if you are logged into the admin panel. In my demo site they are always visible.
In "Theme Description" I wrote about it.

Log out admin panel, or use another browser, or private browser window (ctrl+shift+n in Chrome).
Reply
#58
(2020-07-26, 04:38:44)denis Wrote:
(2020-07-25, 23:27:09)Bill Wrote: I wonder how I can hide the labels : "component x" and "page content" on the page ? I cannot see the option in the settings.
Those labels are helpful when making the website, but are confusing for the visitors when the site is done.

Can anyone help me ?

Visitors should not see them. They are visible only if you are logged into the admin panel. In my demo site they are always visible.
In "Theme Description" I wrote about it.

Log out admin panel, or use another browser, or private browser window (ctrl+shift+n in Chrome).

OK, that make sense thanks !
Reply
#59
Hello Denis, 
I have a problem with the size of the images which appear as zoomed, do you know why, they are at the resolution.
see here : 
http://78.204.31.22:8888/vizevents/?lang=fr
Reply
#60
(2020-09-29, 20:43:01)cybernhard Wrote: Hello Denis,
I have a problem with the size of the images which appear as zoomed, do you know why, they are at the resolution.
see here :
http://78.204.31.22:8888/vizevents/?lang=fr

Hello. I do not know. I can't see the image from the above link
I think this will not work, because: 8888
Code:
<a href="http://192.168.0.1:8888/vizevents/competences"><img class="img-circle" src="http://192.168.0.1:8888/vizevents/theme/my-template/images/Service1.png" alt="Image_0">
</a>
There is no image on this link or access is denied.
http://192.168.0.1:8888/vizevents/theme/...rvice1.png
Also it looks like JS scripts are not loading & Bootstrab CSS. For the same reason.
Or I don't have access to your site.
In the browser console: Failed to load resource: net::ERR_CONNECTION_REFUSED

The template was tested only with regular addresses, for example: domain.com, sub.domain.com
Image resolutions must be the same as in the original.
Reply
#61
Thank you Denis, 
I will try on a normal domain and I will tell you if it's ok.
Reply
#62
(2020-09-30, 02:02:59)cybernhard Wrote: Thank you Denis,
I will try on a normal domain and I will tell you if it's ok.

The site is loading normally now. But I do not see the problem, or I do not understand what it is about.

I see that the slider has poor quality photos.

If you are talking about the section "AVEZ-VOUS VU NOS OFFRES?", then there should not be a photo enlargement.
This is going to another page on click.
Reply
#63
Denis,
yes the images are of poor quality, but the problem is that the slider enlarges the images, like a zoom, they have the dimension of the originals 1920x800 pixels.
As I can not attach an example image, I give you the link to it.
http://78.204.31.22:8888/vizevents/data/...age_50.jpg
Looking at the source code of the generated page, all CSS and script elements seem to load.
I put your theme without any changes, just created pages.

Maybe it's jpeg image format?
Do you want me to give you the administration code to see where the problem is coming from?
Reply
#64
(2020-09-30, 02:46:27)cybernhard Wrote: Denis,
yes the images are of poor quality, but the problem is that the slider enlarges the images, like a zoom, they have the dimension of the originals 1920x800 pixels.
As I can not attach an example image, I give you the link to it.
http://78.204.31.22:8888/vizevents/data/...age_50.jpg
Looking at the source code of the generated page, all CSS and script elements seem to load.
I put your theme without any changes, just created pages.

Maybe it's jpeg image format?
Do you want me to give you the administration code to see where the problem is coming from?

This is the original slider:
https://www.graphberry.com/products/prev...html-theme

Here I put new pictures in my example:
http://demo23.p9021271.beget.tech/

This is how the script works.
He enlarges the picture. And if you change the scale in the browser, the picture will be reduced.

I can advise you to select pictures without close-ups. Filmed as if from afar.
Reply
#65
When I click in add-ons on My Template , I get the warning: Website blocked for phishing. (Malwarebytes Pro).

Domain: demo23.p9021271.beget.tech
Reply
#66
(2020-10-09, 00:04:20)henna4design Wrote: When I click in add-ons on My Template , I get the warning: Website blocked for phishing. (Malwarebytes Pro).

Domain: demo23.p9021271.beget.tech

If you're talking about an example (DEMO: http://demo23.p9021271.beget.tech), the site is hosted for free. Your Internet service provider may be blocking such sites.
The site does not contain malicious code.
Reply
#67
v1.0.5:
- added medium slider
- added setting: switching time for slides
- some other changes
Reply
#68
v1.0.6:
- on/off some animation effects
- image click action settings (follow the link, no action, open in modal window) for components 2-4, 7


Also you can use class="pop" to open an image in a modal window:
<a class="pop" onclick="return false;"><img style="width: 240px;" src="image.jpg"></a>
Reply
#69
Great extra features - Thank you.
Reply
#70
v1.0.7:
- added an alternative two-level menu. If it is disabled in the settings, then the standard GetSimple menu will be used.
Reply
#71
Thank you Denis for V1.07. Love the new menu.
Reply
#72
- Update for component 3 (new option for click action in settings: Open description in page).
- Fixed a bug in the alternative menu (it was impossible to select the second nesting level in the mobile version; bug in js bootstrab 2).

If you want the plugin to be in your own language, you can translate it (plugins/my-template/lang/en.php) and send it to me.
Reply
#73
v1.0.8:
- Update for component 3 (new option for click action in settings: Open description in page whith sort).
The sorting is the same as in the original "Pluton" theme.
To specify a group of sorting elements, a field is used where the URL for other click actions is also indicated.

If you want the plugin to be in your own language, you can translate it (plugins/my-template/lang/en.php) and send it to me.
Reply
#74
v1.1.0:
- Ability to add phone and email to the navbar
- New social network icons
- Some other improvements

If you want the plugin to be in your own language, you can translate it (plugins/my-template/lang/en.php) and send it to me.
Reply
#75
We need a live view
Reply




Users browsing this thread: 2 Guest(s)